Solutions That Deliver High Efficiency and Savings: Energy Automation and Its Use Cases

Solutions That Deliver High Efficiency and Savings: Energy Automation and Its Use Cases

With the spread of industrialization, the need for energy is growing day by day, both in Türkiye and around the world. To keep rising industrial energy needs from causing very high costs, to protect the environment, to prevent energy waste, and to make reporting easier, energy consumption must be monitored. Energy automation is used to manage energy consumption in facilities and the electronics in the electrical system as efficiently as possible, to achieve savings, and to minimize risks. Energy automation is not limited to electrical energy. It can also be applied to electricity, gas, pressure, air leaks, heat, steam, water, natural gas, wind, or other forms of energy in a facility. By keeping energy consumption under control and working in harmony with advanced technology, an energy automation system enables continuous monitoring of energy parameters. It also facilitates a rapid response to any failure in a hardware component of the system and prevents power outages.

What Are the Advantages of an Energy Automation System?

Automation systems are integrated with technology to improve, monitor, and report on technical processes. Energy automation delivers major benefits in many areas, including saving existing energy, minimizing loss of life and property, carrying out safety checks and reducing potential risks, and simplifying workforce allocation and work planning. By continuously tracking energy parameters and detecting faults, an energy automation system enables much safer and more orderly operations. In facilities monitored through automation, costs decrease, and the process of preparing the audits, analyses, and reports required at the end of the work becomes easier. These reports can include a wide range of electrical values such as voltage, current, frequency, active energy, power factor, and reactive energy. The areas with the highest and lowest energy consumption, faulty hardware components, and energy quantities are identified. Based on the information in the reports and archives, new work plans, improvement initiatives, and cost calculations can be developed so that energy is used as efficiently as possible.

In Which Areas Can Energy Automation Be Used?

Energy automation systems can be used in many areas, such as energy-consuming industrial facilities, power plants, and other manufacturing plants. Examples of the areas where energy automation is most widely used include the so-called critical facilities: data centers, the petroleum and chemical industries, power generation and distribution facilities, oil and natural gas pipelines, water treatment and distribution facilities, and cement and automotive manufacturing plants. Energy automation systems can be used in all power plants. Hydroelectric, thermal, wind, geothermal, and solar power plants are areas where energy automation is used extensively. With energy consumption monitored at all times, costs are reduced during processes such as transmission, distribution, and treatment, and a safe working environment is created. In the event of a failure at a substation, power plant, or other facility, switches, disconnectors, circuit breakers, and other similar electrical equipment can be reliably switched off and on through a remotely controllable system. As technology advances, autonomous energy systems carry out remote control operations and the regular transmission of data. This arrangement allows all devices in the facility to interact with one another and operate systematically. The values of analog data from devices such as protection relays and energy analyzers are monitored, displayed graphically, and reported. As a result, every task from consumption to reporting is planned and brought under control, the need for labor decreases, and energy efficiency is achieved.

‹ All Blog Posts